It is necessary to learn the proper procedure for entering a highway - specifically where acceleration and also merging space concerned. Merging v high-speed traffic have the right to be dangerous and also presents a real an obstacle for less-experienced drivers. Your very first time might be a small stressful but with our guidance, girlfriend will get through it just fine. The keys to safe and also successful freeway entry space being vigilant, signaling and matching the rate of currently traffic.

You are watching: Highway off ramps and merging lanes are for

Preparing to enter a highway

As you strategy the highway interchange, salary close fist to course number roadway signs and directional information. Identify your wanted route should be relatively easy - depending upon the style of the highway interchange – but getting ~ above the highway traveling in the correct direction can be tricky. Entrance ramps feeding right into both sides of the highway are regularly positioned nearby together. If you end up traveling in the dorn direction, it might be a while prior to you deserve to exit and also reverse your course.

Of course, accidentally beginning via an exit ramp would certainly be a far more dangerous mistake! must you encounter “DO not ENTER” or “WRONG WAY” indications on what you believe to be an entrance ramp, traction over best away and also turn approximately when that is safe to execute so.

Having properly navigated the interchange and chosen the correct ramp, you will relocate through a three-stage entry zone consisting of of the entrance ramp, an acceleration lane and a merging area. As soon as you room able, start scanning the right-hand roadway of the expressway for gaps in the traffic. Remember the motorists currently using the highway have the right-of-way.

Using enntrance gate ramps

Also recognized as “on-ramps”, entrance ramps may be curved, straight, uphill, downhill or ~ above a level through the highway. Girlfriend may be able to start assessing traffic conditions on the highway native the enntrance gate ramp if that runs surrounding to the road. In ~ this point, chauffeurs should scan the highway come ascertain web traffic density, speed and how much room will be needed to unify successfully. Carry out not problem if the highway is elevated or obscured by a obstacle – store your attention concentrated on the end of the enntrance gate ramp to check for hazards.

Activate your revolve signal prior to you reach the end of the enntrance gate ramp, to show your intention to merge into the acceleration lane. Glance over your shoulder and use your side winter to look because that a gap in the traffic.

To usage entrance ramps safely:


Do no accelerate quickly on entrance ramps that space sharply curved.

Look out for ramp meters

Busier interchanges may have traffic manage devices known as “ramp meters”. These simple signal lamp moderate the flow of vehicles start the highway to stop congestion and have only two signals – red and green. Never ever attempt to enter a highway under a red ramp meter light. A environment-friendly signal usually way that one car may enter, though part interchanges might have higher limits. If 2 or much more cars are allowed entry top top a eco-friendly light, this info will be presented on a road sign.

Double merge lanes

It might be that the highway enntrance gate ramp starts v two lanes which eventually merge into a solitary lane. As twin merge lanes are frequently used top top high-volume entrance ramps, the is most likely the ramp will likewise be controlled by ramp meters. If this is the case, there might be two ramp meter – one for each lane. Make certain you observe the correct signal light because that the lane you are occupying when using a dual merge lane.

Using acceleration lanes

At the finish of the entrance ramp, you will get in the acceleration lane, which is designed for chauffeurs to boost their rate to complement that of existing highway traffic. You need to pay close fist to the rate of vehicles in the right-hand lane while using the acceleration lane, come make certain you can adjust your speed appropriately.

How promptly you have to accelerate will rely on the size of the acceleration lane. Much shorter lanes demand sharper acceleration to enhance the rate of highway traffic prior to the roadway ends. Keep looking for a suitable gap in website traffic as you strategy the finish of the acceleration lane.

When traffic on the highway is flow freely, you need to merge right into the right-hand roadway without slowing under or stopping. Novice drivers often make the mistake of slowing under or comes to a prevent at the end of the acceleration roadway while make the efforts to identify a void in the traffic. This amounts to counter-intuitive and dangerous driving because slower speeds need larger gaps. You must only ever before stop at the end of one acceleration roadway if highway web traffic is too crowded and also slow-moving for regular merging to be possible.

Using the unify area

The merge area adheres to the acceleration lane and also is separated native the right-hand lane through a damaged white line. Having reached an ideal speed and also signaled your intention come turn, you must use this area to unify left ~ above the highway.

Drivers must never attempt to unify onto a highway straight from the acceleration lane using the gore area. This triangle patch of road separates the highway and the acceleration lane and is significant out through solid white lines. The gore area is constantly off-limits come motorists!

Weave lanes

Weave lanes offer both together entrances and also exits because that highways. Conflicts in speed and an are adjustments would occur in between motorists start the weave lane from the highway and those entering from the enntrance gate ramp, because of this right-of-way need to be considered. Drivers exiting the highway via the weave lane have actually the legit right-of-way, so you have to yield once approaching from the entrance ramp.

Merging ~ above a highway

While motorists already using the highway have the right-of-way, lock will regularly move end to allow drivers entering native the unify area come join. When driving previous an entrance ramp ~ above a highway, you must be aware of drivers attempting to merge and make room because that them if possible.

Merging onto a highway smoothly and also safely is a matter of identify a gap large enough to accommodate her vehicle and matching the rate of traffic. Aim because that a four-second an are between cars, as this will certainly afford girlfriend a two-second space both in front and to your rear as soon as the merge is complete. You will sometimes have to settle for a contempt smaller space when beginning a busy highway – this is normal. Just make sure that the space is no too little for friend to merge safely, there is no disrupting the circulation of traffic.

Keep these safety tips in mind once merging onto a highway:


Begin signaling well prior to you intended to merge and also continue law so until the practice is complete.


Maintain a safe adhering to distance from vehicles entering the highway ahead of you, and those in prior of you when you have merged.


Stay alarm if an additional driver is entering the highway front of you, together they could slow under or stop without warning.


Look the end for various other vehicles already on the highway attempting to readjust lanes as you merge.

See more: Installing A Timer On A 3-Way Switch Timer, Wiring A Honeywell 3

As soon as you have started to go into a highway over there is no walk back. You have to continue and also safely merge through highway traffic – even if that becomes noticeable that you have taken a dorn turn. Stopping suddenly or attempting to turn around and exit via the entrance ramp would be incredibly dangerous, as other drivers approximately you will not anticipate it. If you realize you space traveling in the dorn direction, continue along the highway till you with the following exit.